Site Information

shop by Category

CONNECT WITH US

 Loading... Please wait...
01765 688952
  • My Account
  • Order Status
  • Image 1

12 Watt Power Amplifier Module - Plug & Play KEMO M032S

£16.95 (inc VAT) £14.12 (exc VAT)
SKU:
M032S
Shipping:
Calculated at checkout
Quantity:

Product Description

Manufacturers Notes...M032S

With this Plug & Play Amplifier module, the operating voltage may range from 6 to 16 VDC (battery or stabilised power supply). If using a plug in power supply, it should be rated to at least 800mA in order to obtain maximum power output for the Amp. Maximum power output of 12 Watt will be reached at 16 volt and a 4-ohm loudspeaker. Load speakers in the range of 4 to 16 Ohms can be used.

If your input signal is too low, (ie. less than 80mV), it is necessary to connect a preamplifier (e.g. Our product M040) in series.

 

Features...

  • Compact, Cost Effective Form Factor
  • Convenient Audi Input Jack
  • Power Supply Socket
  • Wide Voltage Range ( 6 To 16 VDC)
  • Very Good Frequency Response

 

Note: If the rated maximum voltage is exceeded (> 16 VDC) or a loud speaker lower than 4 Ohm is connected, it can destroy the module! As a precaution, please check your power supply voltage and speaker Ohmage. Although the amps modules are short circuit-proof for a short time, incorrect application can cause defects in the long run. Since the function of each module has been checked carefully by the manufacturer before dispatch, replacement at our expense is not possible for the above reasons!

 

 

Technical data...

  • Operating voltage: 6...16 VDC
  • Current consumption: max. 800 mA
  • Input sensitivity: < 80 mV
  • Loudspeaker connection: 4...16 ohm
  • Music power: max. 12 W with 16 V at a 4 ohm loudspeaker
  • Frequency response: approx. 40...20.000 Hz
  • Dimensions: approx. 71 x 50 x 42 mm

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Customers also viewed