Supplied on reels of 250g, 500g, 1kg, 4kg and 20kg.
Polyester 200 Dual Coat Enamel Round Winding Wire is a high performance modified multi-coat polyester based enamel with a polyamide - imide topcoat and is of the highest specification that the UK has to offer.
Also known as magnet wire, the uses include but are not limeted to electric motors, transformers coils, aerial coils, solonoid coils, contactor coils, starter motors, hermetic motors, lighting chokes, electro magnets, Tesla coils and many many more
Nominal (mm) - 1.00
Square mm - 0.7854
Kgs / Km - 6.982
lbs / 1000 yds - 14.074
Ohms / Km - 21.76
Polyester 200 is a multi-purpose dual coated wire which combines the excellent physical and electrical properties of a polyesterimide or modified polyester base coat with the added chemical resistance, surface toughness, smoothness and high thermal rating of a polyamide-imide linear polymer topcoat. The combination of these two high quality resins produces a coating which has outstanding surface toughness, abrasion resistance, flexibility, chemical resistance, burnout and thermal shock resistance and dielectric strength. These properties coupled with careful selection and processing of the copper produce an enamelled wire which meets the current exacting requirements of the electrical industry.
Polyester 200 has outstanding chemical resistance, being unaffected by all common solvents, including those used for cleaning hermetic units e.g. perchloroethylene, mild acids and alkalis. Its negligible extraction by refrigerants make it first choice for use in hermetically sealed refrigeration units.
Polyester 200 is suitable for use in Class 'H' Systems provided that a compatible and correctly applied impregnating varnish is used and that all other associated insulating materials are of the same classification.
However, as is well established, this classification is dependent on other factors, especially the nature of the operating environment. When evaluated in accordance with the procedures laid down in I.E.C. Publication 172 this covering has a Temperature Index of the order of 212°C.
1mm enamelled copper wire
Posted by Jane on 22nd Jan 2018
Used this in conjunction with 100ml electrical insulating air drying varnish and a short length of acrylic coated woven glass sleeving to rewind a motorcycle stator. The enamelled wire is of high quality and the finished item is spot on - as such I'm delighted with the end result. Due to the difficulty of measuring the diameter of the original wire that I had unwound, I ordered a couple of sizes - 1mm, 1.06mm and 1.12mm - the way I could do some tests to find the closest match to get the best result in the finished item.