KEMO M149 Solar Charging Regulator - 5 Amp (60 Watt)

M149 by KEMO - The solar charging controller is connected between a 12 volt solar panel (open circuit voltage 14...22VDC max.) and a 12v to facilitate and maintain a correct charge rate. The regulator also prevents overcharging of the battery.

• The solar panel can be from 3 watts to 60 watts
• The open circuit voltage of the solar panel should not exceed 22vdc

There are 2 LEDs on the charge regulator, one is a 'Charging' indicator the second is a 'Fully Charged' indicator. 

Technical data:

• Input voltage: solar cell panels: 14...22V= open circuit voltage, nominal voltage: 12V=
• Max. input current: 5A (60 Watt)
• Inrush voltage: battery voltage < approx. 13.4V
• Interrupting voltage: battery voltage > approx. 14.4V
• Displays: 1 LED for "Charging", 1 LED for "Accu full"
• Own power consumption: < 2.5 mA (LED switched on)
• Dimensions: approx. 72 x 50 x 29 mm(without fixing straps)